长江科学院院报 ›› 2017, Vol. 34 ›› Issue (4): 140-143.DOI: 10.11988/ckyyb.20150494

• 水工结构与材料 • 上一篇    下一篇

注入初期盾构壁后注浆体的三轴试验研究

陈喜坤1,朱 伟2,王 睿2   

  1. 1.苏交科集团股份有限公司,南京 210017;
    2.河海大学 土木与交通学院,南京 210098
  • 收稿日期:2015-06-12 出版日期:2017-04-01 发布日期:2017-04-10
  • 作者简介:陈喜坤(1989-),男,河南商丘人,硕士,主要从事盾构隧道科研与设计工作,(电话)15252489968(电子信箱)chenxikunz@126.com。
  • 基金资助:
    国家重点基础研究发展计划(973)项目(2015CB057803);国家自然科学基金项目(51408191);江苏省疏浚与泥处理利用国家工程技术研究中心培育点项目(BM2013013)

Experimental Study on the Triaxial Test of the Shield BackfillGrouting Material at Initial Stage

CHEN Xi-kun1, ZHU Wei2, WANG Rui2   

  1. 1.JSTI Group,Nanjing 210017,China;
    2.College of Civil and Transportation Engineering, Hohai University, Nanjing 210098, China
  • Received:2015-06-12 Published:2017-04-01 Online:2017-04-10

摘要: 壁后注浆体注入初期的变形及力学性质的变化直接影响到土体应力释放、地面沉降以及管片的后期受力情况。基于非自立性材料三轴试验方法,以工程常用的硬性浆和惰性浆为研究对象,开展了三轴固结不排水剪切试验。结果表明高围压有助于浆液排水固结,且浆液最终体应变也随着围压增加而增大;浆液在不排水条件下剪切过程呈现出应变硬化性,体积先收缩,随后呈现出明显的剪胀特性。在满足变形及施工要求的前提下,适当提高注浆压力及采用水胶比较小的浆液,有利于保证注浆体的施工质量。

关键词: 盾构, 壁后注浆, 三轴试验, 剪切应力, 孔压消散, 体应变

Abstract: Deformation and mechanical properties of backfill grouting material directly affect soil stress release, ground subsidence and late stress situation of segment lining. Based on triaxial test method of non-independent material, we take the rigid slurry and inert slurry as research objects, carrying out consolidated non-drained triaxial shear test. Results show that, 1) high confining pressure contributes to the consolidation and drainage of the slurry, and the ultimate volumetric strain of the slurry increase with confining pressure; 2) in the shearing process on the non-drained condition, slurry shows tendency of strain hardening, and the volume shrinks first, then with obvious shear dilatation. On the premise of deformation and construction requirements, we can suitably increase grouting pressure and use slurry with smaller water-glue ratio to ensure the construction quality of grouting body.

Key words: shield, backfill grouting, triaxial test, shear stress, pore pressure dissipation, volume strain

中图分类号: