长江科学院院报 ›› 2021, Vol. 38 ›› Issue (5): 144-148.DOI: 10.11988/ckyyb.20200071

• 水工结构与材料 • 上一篇    下一篇

陶粒混杂纤维混凝土强度正交试验研究

沈恒祥, 孔云, 庞建勇   

  1. 安徽理工大学 土木建筑学院,安徽 淮南 232000
  • 收稿日期:2020-02-27 修回日期:2020-05-02 出版日期:2021-05-01 发布日期:2021-05-17
  • 通讯作者: 庞建勇(1964-),男,河北保定人,教授,博士,博士生导师,从事岩土工程方面的教学与研究。E-mail:pangjyong@163.com
  • 作者简介:沈恒祥(1999-),男,安徽亳州人,本科在读,研究方向为岩土工程及混凝土材料。E-mail:2012208840@qq.com

Orthogonal Experiment on Strength of Ceramsite Hybrid Fiber Concrete

SHEN Heng-xiang, KONG Yun, PANG Jian-yong   

  1. College of Civil Engineering and Architecture, Anhui University of Science and Technology, Huainan 232000, China
  • Received:2020-02-27 Revised:2020-05-02 Online:2021-05-01 Published:2021-05-17

摘要: 为了解决目前轻质混凝土力学性能不足的问题,开展了向轻质混凝土中掺入多种纤维以提高其力学性能的试验。采用正交试验方法分析了陶粒、玄武岩纤维和聚丙烯纤维这3种添加物对于混凝土抗压强度和最大抗剪荷载的影响。结果表明:陶粒替代部分粗骨料能够有效降低混凝土的自重并大幅度降低混凝土的抗压强度,但陶粒可以提升混凝土的最大抗剪荷载,最大提升幅度为13.7%;玄武岩纤维与聚丙烯纤维的掺入可以有效地提高混凝土的抗压强度和最大抗剪荷载,对混凝土抗压强度的最大提升幅度分别为9.7%和5.7%,对混凝土最大抗剪荷载的最大提升幅度分别为36.2%和13.1%。建立的混杂纤维混凝土抗压强度和最大抗剪荷载的预测模型能够精确地预测其抗压强度以及最大抗剪荷载。研究成果对混杂纤维混凝土的力学性能研究具有一定的参考价值。

关键词: 混杂纤维混凝土, 正交试验, 抗压强度, 最大抗剪荷载, 强度预测模型

Abstract: In view of the insufficient mechanical properties of lightweight concrete, various fibers are added to lightweight concrete to improve its mechanical properties. The influences of adding ceramsite, basalt fiber, and polypropylene fiber on the compressive strength and maximum shear strength of concrete were investigated by using orthogonal test. Results reveal that replacing part of coarse aggregate with ceramsite could effectively reduce the dead weight of concrete, but also greatly reduce the compressive strength; ceramsite could improve the maximum shear strength of concrete, with a maximum rising rate of 13.7%. Both basalt fiber and polypropylene fiber could enhance the compressive strength and maximum shear strength of concrete, boosting the compressive strength by up to 9.7% and 5.7% respectively and maximum shear strength by 36.2% and 13.1% respectively. In addition, a prediction model for the compressive strength and maximum shear strength of hybrid fiber concrete is established.

Key words: hybrid fiber reinforced concrete, orthogonal test, compressive strength, maximum shear strength, strength prediction model

中图分类号: