长江科学院院报 ›› 2014, Vol. 31 ›› Issue (4): 63-67.DOI: 10.3969/j.issn.1001-5485.2014.04.0142014, 31(04):63-67

• 岩土工程 • 上一篇    下一篇

土体表面干缩裂隙的形态参数定量分析方法

曹 玲1, 2, 王志俭1   

  1. 1.三峡地区地质灾害与生态环境湖北省协同创新中心, 湖北 宜昌 443002;
    2.上海交通大学 土木工程系, 上海 200240
  • 收稿日期:2013-11-04 修回日期:2014-04-04 出版日期:2014-04-01 发布日期:2014-04-04
  • 通讯作者: 王志俭(1975-), 男, 浙江遂昌人, 副教授, 博士, 研究方向为非饱和土力学及边坡支护工程, (电话)13094177963(电子信箱)841744843@qq.com。
  • 作者简介:曹 玲(1979-), 女, 湖北天门人, 讲师, 博士研究生, 研究方向为非饱和土力学及边坡支护工程, (电话)13197349034(电子信箱)10346058@qq.com。
  • 基金资助:
    国家自然科学基金资助项目(41372359)

A Quantitative Analysis System for Morphological Parametersof Surface Desiccation Cracks in Clay

CAO Ling1, 2, WANG Zhi-jian1   

  1. China Three Gorges University, Yichang 443002, China;2.Department of Civil Engineering, Shanghai Jiaotong University, Shanghai 200240, China
  • Received:2013-11-04 Revised:2014-04-04 Online:2014-04-01 Published:2014-04-04

摘要: 为了解土体干缩裂隙演化规律, 基于MATLAB软件开发了裂隙图像分析系统, 通过对裂隙图像进行二值化、桥接去杂、骨架提取等操作, 进而提取出裂隙率、裂隙长度、平均宽度、隙宽分布率、分维等裂隙形态参数, 实现了平面裂隙图像的无损、连续、动态识别和形态参数定量分析。该裂隙网络图像分析程序为土体干缩裂隙的动态演化分析提供了依据, 可用于边坡稳定性分析、环境污染控制等众多领域。

关键词: 裂隙, 形态参数, 二值化, 图像识别, 隙宽分布率

Abstract: In order to find out the evolvement regularity of surface cracks in soil due to drying shrinkage, an analysis system of crack’s parameters was developed by using MATLAB. Through binarization, crack restoration, noise reduction and skeleton extraction, the morphological parameters of cracks, such as crack rate, length, width, width grading and fractal dimension, were computed by further recognition methods. Through this system, the non-destructive, continuous and dynamic recognition of cracks, as well as the rapid and accurate quantitative analysis of morphological parameters were achieved. Moreover, this system offered a reliable basis for the analysis of dynamic evolvement of cracks. It can be used in slope stability analysis, environmental pollution-control and many other areas.

Key words: crack, morphological parameter, binarization, image recognition, crack width grading

中图分类号: