长江科学院院报 ›› 2013, Vol. 30 ›› Issue (11): 50-54.DOI: 10.3969/j.issn.1001-5485.2013.11.0112013,30(11):50-54

• 水力学 • 上一篇    下一篇

消力坎式消力池淹没系数和坎高的计算

张志昌,李若冰,赵莹,傅铭焕   

  1. 西安理工大学水利水电学院,西安710048
  • 收稿日期:2012-10-09 修回日期:2013-11-07 出版日期:2013-11-30 发布日期:2013-11-07
  • 作者简介:张志昌(1954-),男,陕西西安人,教授级高级工程师,主要从事水工水力学研究,(电话)13991942265(电子信箱)zhangzhichang1954@163.com。

Calculation of the Submergence Coefficient and the Sill Height of Sill-type Stilling Basin

ZHANG Zhi-chang, LI Ruo-bing, ZHAO Ying, FU Ming-huan   

  1. Institute of Water Resources and Hydro-electric Engineering,Xi’an University of Technology, Xi’an 710048, China
  • Received:2012-10-09 Revised:2013-11-07 Online:2013-11-30 Published:2013-11-07

摘要: 为了研究消力坎式消力池淹没系数和消力坎高度的简化计算方法,以取代传统的试算法。综合前人对消力坎淹没系数的研究成果,对淹没系数进行优化拟合,进而推求淹没系数的迭代公式;分析了消力池坎高的简化计算方法;通过动量方程研究消力坎的阻力系数。研究给出了淹没系数的拟合公式和迭代公式、坎高的简化公式以及消力坎阻力系数的计算公式,并通过实例验证了公式的正确性。结果表明,淹没系数的迭代公式和坎高的简化公式形式简单,避免了试算的困难。

关键词: 消力坎式消力池, 淹没系数, 坎高, 阻力系数, 迭代计算

Abstract: The simplified calculation methods for the submergence coefficient and the sill height of sill-type stilling basin are researched to substitute the traditional trial method. On the basis of previous researches, the iterative formula of submergence coefficient is derived through optimizing fitting, and the simplified calculation method of the sill height is analyzed. Furthermore, the drag coefficient of the sill is researched through momentum equation to provide technical support for its intensity design. The fitting and iterative formula of submergence coefficient, the simplified formula of sill height and the formula of drag coefficient are put forward and verified correct by examples. The iterative and simplified formulas are simple in form, and avoid the complexity of trial method.

Key words: sill-type stilling basin, submergence coefficient, sill height, drag coefficient, iterative calculation

中图分类号: