基于雕刻机的河工模型断面板加工系统

长江科学院院报 ›› 2010, Vol. 27 ›› Issue (9): 79-82.

基于雕刻机的河工模型断面板加工系统

胡向阳^¹, 张雨^², 张文二^¹, 许明^¹

1. 长江科学院河流研究所，武汉 430010 ； 2. 北京尚水信息技术股份有限公司，北京 100085

出版日期:2010-09-01 发布日期:2012-08-22

Processing System for Section Board of River Model Based on CNC Engraving Machine

HU Xiang-yang^¹, ZHANG Yu^², ZHANG Wen-er^¹, XU Ming^¹

1.Yangtze River Scientific Research Institute, Wuhan 430010, China ； 2.Beijing Shangshui Information Technology Co. Ltd, Beijing 100085, China

Online:2010-09-01 Published:2012-08-22

摘要/Abstract

摘要： 介绍基于数控雕刻机的河工模型断面板自动加工系统，采用了优化的排序算法使一块模板上能加工尽可能多的断面板，节省了板材，降低了使用成本；系统使用高效率和高精度的数控雕刻机进行断面板的加工，保证了加工质量；考虑数控加工中的刀具补偿，提高了加工精度；系统具有网络化结构，实现了远程控制，方便使用。

关键词: 河工模型实验, 断面板加工, 自动排序, 数控雕刻机, CAD/CAM

Abstract: The paper introduces a river model cross-section board auto-processing system based on a CNC engraving machine, in which an optimum sorting algorithm is used for making model cross-section boards as much as possible on a wood-board. The system can improve the utilization of the material, reduce production cost and guarantee processing quality. Meanwhile,owing to considering the cutter compensation in numerical control processing, the accuracy of model board is enhanced, and because of the system adopts a network construction to realize the remote control, it is very easy to be used.

Key words: river model experiment , section board processing , automatic sorting , CNC engraving machine , CAD/CAM

中图分类号:

TV149.3

胡向阳 , 张雨 , 张文二 , 许明 . 基于雕刻机的河工模型断面板加工系统[J]. 长江科学院院报, 2010, 27(9): 79-82.

HU Xiang-yang , ZHANG Yu , ZHANG Wen-er , XU Ming . Processing System for Section Board of River Model Based on CNC Engraving Machine[J]. JOURNAL OF YANGTZE RIVER SCIENTIFIC RESEARCH INSTI, 2010, 27(9): 79-82.

[1]	吴新生, 韩向东, 黄卫东, 廖小永. 新型ADV流速仪在桥墩模型试验中的应用[J]. 长江科学院院报, 2011, 28(11): 104-109.
[2]	吴新生，林木松，廖小永，万星星. 深圳河口潮汐模型变频生潮与量测控制系统[J]. 长江科学院院报, 2010, 27(4): 5-10.