In Finite Element Method, the connection between plate shell elements and solid elements needs special treatment, and their meshes at the connection must be matched, which brings some inconveniences. In our previous research, the piecewise-defined series solutions for the numerical analysis of beam, plate and shell are proposed by using manifold method based on independent covers. On this basis, the rigid connection between plate shell elements and solid elements is studied in this paper. The solid calculation mode is also adopted in the analysis of plate and shell which are naturally connected with the solid element through the overlapping area of the covers. In view of the characteristic of arbitrary connection of independent covers, the plate or the shell is inserted into the solid to form the overlapping area of the covers. The solid and the shell can be meshed separately in no need of mesh matching at the connection, which is very conducive to the preprocessing work. Highly precise results can be obtained when the mesh division reaches a certain density. The effectiveness of the method is verified by examples of a cantilever beam with variable sections, and a spherical shell with a solid base. The accurate geometry of the intersection curve between the curved shell and the solid is also preliminarily demonstrated. The three-dimensional elastic matrix of the new method is also modified.
Key words
beam, plate and shell analysis /
connection between plate shell and solid element /
series solutions /
numerical manifold method /
independent covers
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] ZIENKIEWICZ O C , TAYLOR R L.有限元方法.第2卷,固体力学[M].第5版.庄 茁,岑 松,译.北京:清华大学出版社,2006.
[2] BELYTSCHKO T, LIU W K, MORAN B,等.连续体和结构的非线性有限元[M].庄 茁,柳占立,成 健,译.北京:清华大学出版社,2002.
[3] 王勖成.有限单元法 [M].北京:清华大学出版社,2003.
[4] 苏海东,颉志强,龚亚琦,等.基于独立覆盖的流形法收敛性及覆盖网格特性[J].长江科学院院报,2016,33(2):131-136.
[5] 苏海东,颉志强.梁的独立覆盖分析方法[J].长江科学院院报,2018,35(4):143-150.
[6] 苏海东,周 朝,颉志强.基于精确几何的曲梁分析新方法[J].长江科学院院报,2018,35(4):151-157.
[7] 苏海东,周 朝,颉志强,等.采用独立覆盖流形法分析精确几何描述的曲壳[J].长江科学院院报,2018,35(4):158-166.
[8] 苏海东,韩陆超,颉志强.基于精确几何薄曲梁曲壳分析的分区级数解[J].长江科学院院报,2022,39(9):144-151.
[9] 周 朝.基于精确几何的曲壳分析和拱坝计算[D].武汉:长江科学院,2018.
[10] SHI G H. Manifold Method of Material Analysis[C] //U. S. Army Research Office. Transactions of the Ninth Army Conference on Applied Mathematics and Computing, Minneapolis, Minnesota, U. S. A, June 18-21, 1991: 51-76.
[11] SU Hai-dong, QI Yong-feng, GONG Ya-qi, et al. Preliminary Research of Numerical Manifold Method Based on Partly Overlapping Rectangular Covers[C] //DDA Commission of International Society for Rock Mechanics. Proceedings of the 11th International Conference on Analysis of Discontinuous Deformation (ICADD11), Fukuoka, Japan, August 27-29, 2013. London: Taylor & Francis Group, 2013: 341-347.
[12] BABUSKA I, MELENK J M. The Partition of Unity Method[J]. International Journal for Numerical Methods in Engineering, 1997, 40: 727-758.
[13] 苏海东,付 志,颉志强.基于任意形状网格和精确几何边界的数值计算[J].长江科学院院报,2020,37(7):167-174.
[14] 苏海东,付 志,颉志强.基于任意网格划分的二维自动计算[J].长江科学院院报,2020,37(7):160-166.
[15] 吴连元.板壳理论[M].上海:上海交通大学出版社,1989.
[16] 李 迪.板壳畸变单元的无网格和有限元自适应耦合方法研究[D].上海:上海交通大学,2009.
PDF(5450 KB)
