Characteristic Load of Prestressed Anchor Cable of High Slope Based on Pull-out Test on Site

JIANG Guan; FENG Zhong-ju; ZHAO Rui-xin; WANG Fu-chun; WANG Zheng-bin; ZHANG Zheng-xu

doi:10.11988/ckyyb.20201003

PDF(1708 KB)

Journal of Changjiang River Scientific Research Institute ›› 2022, Vol. 39 ›› Issue (1) : 100-106. DOI: 10.11988/ckyyb.20201003

ROCK-SOIL ENGINEERING

Characteristic Load of Prestressed Anchor Cable of High Slope Based on Pull-out Test on Site

JIANG Guan¹, FENG Zhong-ju¹, ZHAO Rui-xin¹, WANG Fu-chun¹, WANG Zheng-bin¹, ZHANG Zheng-xu²

Author information +

History +

Abstract

Composed of working load and ultimate load, the characteristic load of prestressed anchor cable is a critical basis for judging the anchoring effect of anchor cables. The load transfer mechanism of prestressed anchor cable is examined according to the load-incremental displacement curve obtained from six groups of in-situ pull out destructive tests. The method of determining the characteristic load of prestressed anchor cables is also proposed. The whole process of cable in pull load are divided into four stages: the fastening of external anchor segment, the drawing of outer anchor segment, the drawing of free segment, and the sliding of anchorage segment. The working load of anchor cable is determined as the average value between the upper and lower limits of the inflection point of the stage of free segment drawing, while the ultimate load is determined according to the steep increment point of pull-out curve, corresponding to that at incremental displacement 3 mm. In addition, numerical model of the pull-out test is also established using FLAC^3D to analyze the shear stress distribution of cable-grouting body and coupling body-rock interface in anchored segment, verifying the accuracy of the ultimate load displacement criterion.

Key words

characteristic load / prestressed anchor cable / pull-out test / numerical model / load-incremental displacement curve

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

JIANG Guan, FENG Zhong-ju, ZHAO Rui-xin, WANG Fu-chun, WANG Zheng-bin, ZHANG Zheng-xu. Characteristic Load of Prestressed Anchor Cable of High Slope Based on Pull-out Test on Site[J]. Journal of Changjiang River Scientific Research Institute. 2022, 39(1): 100-106 https://doi.org/10.11988/ckyyb.20201003

References

[1] 冯忠居,张永清,李晋.堆载引起桥梁墩台与基础的偏移及防治技术研究[J].中国公路学报,2004(3):77-80.
[2] 冯忠居,张永清.预应力锚索技术加固处理滑坡上桥墩偏移[J].西安公路交通大学学报,2001(3):39-41.
[3] 冯忠居,于翔,冯凯.公路加宽高边坡二次开挖落石防护风险评估[J].公路,2019,64(6):9-15.
[4] 冯忠居,朱彦名,高雪池,等.基于熵权-灰关联法的岩质开挖边坡安全评价模型[J].交通运输工程学报,2020,20(2):55-65.
[5] 徐青,徐寅,陈胜宏,等.复杂岩质边坡预应力锚索优化设计[J].长江科学院院报,2011,28(2):32-37.
[6] 江权,陈建林,冯夏庭,等.大型地下洞室对穿预应力锚索失效形式与耦合模型[J].岩土力学,2013,34(8):2271-227.
[7] 李英勇,张顶立,张宏博,等.边坡加固中预应力锚索失效机制与失效效应研究[J].岩土力学,2010,31(1):144-150,157.
[8] 李福海,贾毅,胡丁涵,等.工作荷载和高地温环境下锚杆极限拉拔力试验研究[J].铁道学报,2018,40(2):125-131.
[9] 姚强岭,王伟男,孟国胜,等.树脂锚杆不同锚固长度锚固段受力特征试验研究[J].采矿与安全工程学报,2019,36(4):643-649.
[10] 张向东,王帅,赵阳豪,等.基于端锚黏结式锚杆静、动载试验的非均匀受力锚杆单元[J].岩土力学,2016,37(1):269-278.
[11] 于远祥,谷拴成,吴璋,等.黄土地层中预应力锚索锚固力试验与分析[J].解放军理工大学学报(自然科学版),2010,11(5): 522-527.
[12] 陈军,梁文鹏,应宏伟.大直径水泥土锚索合理间距的试验与数值研究[J].岩土力学,2018,39(增刊2):374-380.
[13] 沈俊,顾金才,张向阳,等.拉力型和压力型自由式锚索现场拉拔试验研究[J].岩石力学与工程学报,2012,31(增刊1):3291-3297.
[14] 薛亚东,黄宏伟.锚索锚固力影响因素的试验分析研究[J].岩土力学,2006(9):1523-1526.
[15] 薛亚东,黄宏伟.水对树脂锚索锚固性能影响的试验研究[J].岩土力学,2005(增刊1):31-34.
[16] 肖世国,曹顺利,赵琳智.加固岩体的预应力锚索拉力松弛分析模型[J].北京工业大学学报,2020,46(8):940-947.
[17] 王勇华,熊二刚,王小勇.黄土中压力型锚索锚固段应力分析[J].力学季刊,2020,41(2):231-239.
[18] 范宇洁,郑七振,魏林.预应力锚索锚固体的破坏机理和极限承载能力研究[J].岩石力学与工程学报,2005(15):2765-2769.
[19] 付丹,郭红仙,程晓辉,等.预应力锚索工作应力的检测方法——拉脱法的检测机制和试验研究[J].岩土力学,2012,33(8):2247-2252.
[20] 尤春安.锚固系统应力传递机理理论及应用研究[J].岩石力学与工程学报,2005,24(7):1272.