A simple and rapid method of triaxial test on non-filled rock specimens containing irregular discontinuities by using rock mechanics test system (MTS) is presented in this paper. Multiple shear strength data can be obtained by using this method in the presence of only one single specimen. The difficulty of preparing test specimen is overcome and the highly discrete test results can be avoided. In addition, approaches to determine the parameters of linear Mohr-Coulomb criterion fitting, power function fitting and nonlinear Barton equation fitting according to test results are examined and the results of different approaches are compared to verify the rationality of the method. The application scope of the test method is also put forward. Results suggest that power function fitting and nonlinear Barton equation fitting are superior to Mohr-Coulomb criterion in reflecting the nonlinearity of shear strength of jointed rock. When 0.01<σnj/JCS<0.3, the result of shear strength of jointed rock obtained by the two fitting methods are reliable; when σnj/JCS>0.3, the result is larger.
Key words
non-filled rock /
discontinuity /
shear strength /
triaxial test /
determining method
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
References
[1] LAM T S K, JOHNSTON I W. Shear Behavior of Regular Triangular Concrete/Rock Joints—Evaluation[J]. Journal of the Geotechnical Engineering Division, Proceedings of American Society of Civil Engineering, 1989, 115(5): 728-740.
[2] HENCHER S R, RICHARDS L. Laboratory Direct Shear Testing of Rock Discontinuities[J]. Ground Engineering, 1989, 22(2): 24-31.
[3] 李克钢,许 江,李树春.三峡库区岩体天然结构面抗剪性能试验研究[J].岩土力学,2005,26(7):1063-1067.
[4] BARTON N. Review of a New Shear Strength Criterion for Rock Joints[J]. Engineering Geology,1973,7(4):287-332.
[5] 邹宗兴,唐辉明,刘 晓,等.制样误差对结构面直剪试验结果影响定量研究[J].岩石力学与工程学报,2010,29(8):1664-1669.
[6] 雍 睿,胡新丽,唐辉明,等.岩体结构面直剪试验制样误差效应研究[J].中南大学学报(自然科学版),2013,44(11):4643-4651.
[7] WINES D R, LILLY P A. Estimates of Rock Joint Shear Strength in Part of the Fimiston Open Pit Operation in Western Australia[J]. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(6): 929-937.
[8] LIU Y, XIA C C. Advances in Research of Rock Masses Containing Discontinuous Joints in Direct Shear Test[J]. Rock and Soil Mechanics, 2007, 28(8): 1719-1724.
[9] 孙辅庭,佘成学,万利台.Barton标准剖面JRC与独立于离散间距的统计参数关系研究[J].岩石力学与工程学报,2014,33(增2):3539-3544.
PDF(1580 KB)
