岩土工程

弹塑性各向异性损伤模型的FLAC3D开发与数值验证

  • 杨云浩 ,
  • 陈鸿杰 ,
  • 王伟
展开
  • 1.中国水电顾问集团成都勘测设计研究院,成都610072;
    2.河海大学a.岩土力学与堤坝工程教育部重点实验室;b.岩土工程研究所,南京210098
杨云浩(1977-),男,山西黎城人,工程师,博士,从事岩石力学与地下工程方面的研究,(电话)15928690461(电子信箱)haoyunyang2001@163.com。

收稿日期: 2012-12-26

  修回日期: 2013-12-10

  网络出版日期: 2013-12-10

Implementation and Numerical Verification ofElastoplastic-Anisotropic Damage Constitutive Model in FLAC3D

  • YANG Yun-hao ,
  • CHEN Hong-jie ,
  • WANG Wei
Expand
  • 1.Hydro China Chengdu Engineering Corporation,Chengdu 610072,China;
    2.Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering,Hobai University,Nanjing 210098,China;
    3.Research Institute of Geotechnical Engineering,Hohai University ,Nanjing 210098,China

Received date: 2012-12-26

  Revised date: 2013-12-10

  Online published: 2013-12-10

摘要

探讨适用于硬岩的各向异性损伤模型在FLAC3D中的实现方法。首先,基于不可逆热力学框架下的弹塑性损伤本构基本理论,结合弹塑性力学塑性势与非关联塑性流动法则,导出了弹塑性各向异性损伤本构模型的增量形式及损伤演化速率的计算公式,在此基础上,采用复合M-C准则并考虑黏聚力随损伤的逐步弱化,详细给出了该损伤模型在FLAC3D中的实现流程并探讨了相关细节处理方法,编写了相应的DLL文件以供调用。进而,通过圆柱试样的压缩数值试验验证其正确性与合理性,结果表明该损伤模型能够较好地描述岩石材料的非线性力学行为;以一个概化的地下洞室分层开挖实例初步检验了模型的应用效果,计算所得洞周损伤较大部位与实际工程中直接或间接观测到的围岩损伤情况较为一致,由此表明以拉应变度量的损伤及其演化方程能够合理地反映硬岩的损伤本质。

本文引用格式

杨云浩 , 陈鸿杰 , 王伟 . 弹塑性各向异性损伤模型的FLAC3D开发与数值验证[J]. 长江科学院院报, 2013 , 30(12) : 48 -53 . DOI: 10.3969/j.issn.1001-5485.2013.12.009

Abstract

The implementation of an anisotropic damage constitutive model in FLAC3D for hard rock is presented in this paper. An incremental form of elastoplastic-anisotropic damage constitutive equation is first deduced using the plastic mechanics theory and the elastoplastic-damage constitutive theory within the framework of thermodynamics of irreversible process. Meanwhile the concrete form of evolution rate of damage tensor is determined by the consistence condition of damage criterion. On the basis of these formulas,the detailed flowchart of numerical calculation by using the elastoplastic-anisotropic damage model and M-C yield criterion is established and some details the numerical calculation are also discussed. A DLL(Dynamic Link Library) file corresponding to the elastoplastic-anisotropic damage model is written to be called by the FLAC3D software. The uniaxial and triaxial compression numerical tests of cylinder sample are then conducted to test the validity of this user-defined model. The results show that this model is capable of describing the nonlinear behavior of hard rock. The validity of elastoplastic-anisotropic damage model in practice is further tested by applying it to a numerical simulation of staged excavation of a fictitious underground opening. Result show that the highly damaged zone around the opening determined by the simulation is in agreement with the actual observation in project area. The result also show that using the tensile strain tensor to measure damage and establish damage criterion grasps the nature of hard rock damage.

参考文献

[1] SALARI M R, SAEB S, WILLAM K J, et al. A Coupled Elastoplastic Damage Model for Geomaterials[J]. Computer Methods in Applied Mechanics and Engineering, 2004, 193(27/29): 2625-2643.
[2] GOLSHANI A, YOSHIAKI O, MASANOBU O, et al. A Micromechanical Model for Brittle Failure of Rock and Its Relation to Crack Growth Observed in Triaxial Compression Tests of Granite[J]. Mechanics of Materials, 2006, 38(4) : 287-303.
[3] 刘洪永,程远平,赵长春,等. 采动煤岩体弹脆塑性损伤本构模型及应用[J]. 岩石力学与工程学报, 2010, 29(2): 358-365.(LIU Hong-yong, CHENG Yuan-ping, ZHAO Chang-chun, et al. Constitutive Model for Elasto-Brittle-Plastic Damage of Coal Rock Mass Due to Mining and Its Application[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(2): 358-365.(in Chinese)
[4] SHAO J F, JIA Y, KONDO D, et al. A Coupled Elastoplastic Damage Model for Semi-brittle Materials and Extension to Unsaturated Conditions[J]. Mechanics of Materials, 2006, 38(3) : 218-232.
[5] 贾善坡,陈卫忠,于洪丹,等. 泥岩隧道施工过程中渗流场与应力场全耦合损伤模型研究[J]. 岩土力学,2009,30(1):19-26.(JIA Shan-po, CHEN Wei-zhong, YU Hong-dan, et al. Research on Seepage-Stress Coupling Damage Model of Boom Clay during Tunneling[J]. Rock and Soil Mechanics, 2009, 30(1): 19-26.(in Chinese)
[6] 贾善坡,陈卫忠,于洪丹,等. 泥岩弹塑性损伤本构模型及其参数辨识[J]. 岩土力学,2009,30(12):3607-3614.(JIA Shan-po, CHEN Wei-zhong, YU Hong-dan, et al. Parameter Identification of New Elastoplastic Damage Constitutive Model for Claystone[J]. Rock and Soil Mechanics, 2009, 30(12): 3607-3614.(in Chinese)
[7] MITAIM S, DETOURNAY E. Damage around a Cylindrical Opening in a Brittle Rock Mass[J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(8): 1447-1457.
[8] CAI M, KAISER P K, TASAKA Y. Generalized Crack Initiation and Crack Damage Stress Thresholds of Brittle Rock Masses near Underground Excavations[J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41(5): 833-847.
[9] 黄润秋,黄 达. 高地应力条件下卸荷速率对锦屏大理岩力学特性影响规律试验研究[J]. 岩石力学与工程学报,2010,29(1):21-33.(HUANG Run-qiu,HUANG Da. Experimental Research on Affection Laws of Unloading Rates on Mechanical Properties of Jinping Marble under High Geostress[J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(1): 21-33.(in Chinese)
[10]周维垣,剡公瑞,杨若琼. 岩体弹脆性损伤本构模型及工程应用[J]. 岩土工程学报,1998,20(5):54-57.(ZHOU Wei-yuan, YAN Gong-rui, YANG Ruo-qiong. Elasto-brittle Damage Model for Rockmass Based on Field Tests in Laxiwa Arch Dam Site[J]. Chinese Journal of Geotechnical Engineering, 1998, 20(5): 54-57.(in Chinese)
[11]高政国,黄达海,赵国藩. 碾压混凝土的正交异性损伤本构模型研究[J]. 水利学报,2001,(5):58-64.(GAO Zheng-guo, HUANG Da-hai, ZHAO Guo-fan. An Orthotropic Damage Constitutive Model for RCC[J]. Journal of Hydraulic Engineering, 2001, (5): 58-64.(in Chinese)
[12]CHIARELLI A S, SHAO J F, HOTEIT N. Modeling of Elastoplastic Damage Behavior of a Claystone[J]. International Journal of Plasticity, 2003, 19(1): 23-45.
[13]JU J W. On Energy-based Coupled Elastoplastic Damage Theories: Constitutive Modeling and Computational Aspects[J]. International Journal of Solids and Structures, 1989, 25(7): 803-833.
[14]MURAKAMI S, KAMIYA K. Constitutive and Damage Evolution Equations of Elastic-brittle Materials Based on Irreversible Thermodynamics[J]. International Journal of Mechanical Sciences, 1997, 39(4): 473-486.
[15]Itasca Consulting Group Inc. FLAC3D User’s Manual: Theory and Background in FLAC3D[M]. Minneapolis: Itasca Consulting Group, 2005.
文章导航

/

〈 〉