长江科学院院报 ›› 2017, Vol. 34 ›› Issue (4): 131-135.DOI: 10.11988/ckyyb.20160066

• 水工结构与材料 • 上一篇    下一篇

CW环氧树脂灌浆材料的固化动力学研究

李嘉祥1,2,3,魏 涛2,3,汪在芹2,3   

  1. 1.三峡大学 水利与环境学院,湖北 宜昌 443002;
    2.三峡地区地质灾害与生态环境湖北省协同创新中心,湖北 宜昌 443002;
    3.长江科学院,武汉 430010
  • 收稿日期:2016-01-20 出版日期:2017-04-01 发布日期:2017-04-10
  • 通讯作者: 魏 涛(1964-),男,河南邓县人,教授级高级工程师,主要研究方向为水工新材料开发及混凝土的修补,(电话)15972018245(电子信箱)weitao@mail.crsri.cn。
  • 作者简介:李嘉祥(1990-),男,湖北宜昌人,硕士研究生,主要从事水工新材料制备与应用技术研究,(电话)13669077292(电子信箱)173605993@qq.com。
  • 基金资助:
    国家自然科学基金项目(51378078,51579019)

Curing Kinetics of CW Epoxy Resin Grouting Material

LI Jia-xiang1,2,3, WEI Tao2,3, WANG Zai-qin2,3   

  1. 1.College of Hydraulic & Environmental Engineering, China Three Gorges University,Yichang 443002,China;
    2.Collaborative Innovation Center for Geo-hazards and Eco-environment in Three Gorges Area in HubeiProvince, Yichang 443002, China;
    3.Yangtze River Scientific Research Institute, Wuhan 430010, China
  • Received:2016-01-20 Published:2017-04-01 Online:2017-04-10

摘要: CW环氧树脂灌浆材料在三峡、葛洲坝和丹江口等水利工程中得到广泛应用,目前针对其固化动力学的试验研究鲜有报道。采用非等温DSC法对CW环氧树脂灌浆材料的固化反应过程进行了试验研究,获得了CW环氧树脂灌浆材料在5,10,15,20,25 K/min 5种升温速率条件下的DSC曲线。通过Kissinger方程和Crane方程,得到了固化反应的表观活化能Ea、表观频率因子A和反应级数n,并建立了针对CW环氧树脂浆液的n级固化动力学模型。该模型可以预测和分析CW环氧树脂灌浆材料固化反应特性,再结合试验数据,能够更好地指导浆液的改性理论研究和工程实践。

关键词: CW环氧树脂, 灌浆材料, 固化反应, 固化动力学, 固化度

Abstract: CW epoxy resin grouting material has been widely used in water conservancy projects such as Three Gorges Project, Gezhouba Project and Danjiangkou Project. At present, there are few studies on its curing kinetics. In this article, experiments were carried out to study the process of curing reaction of CW epoxy resin grouting material by using non isothermal DSC(Differential Scanning Calorimetry). The DSC curves at five different heating rates(5, 10, 15, 20, 25 K/min) were obtained. According to Kissinger function and Crane function, the apparent activation energy Ea, apparent frequency factor A and reaction order n of CW epoxy resin grouting material were obtained, and the n-tier curing kinetic model was established. The model can be used to predict and analyze the curing reaction characteristics of CW epoxy resin grouting material, and could guide the theoretical researches and engineering practice of the modification of grouting material combined with test data.

Key words: CW epoxy resin, grouting material, curing reaction, curing kinetics, curing degree

中图分类号: