长江科学院院报 ›› 2000, Vol. 17 ›› Issue (4): 12-14.

• 水工水力学 • 上一篇    下一篇

三峡工程表孔体型空化试验研究

 郭均立, 芦俊英   

  1. 长江科学院 水工研究所,湖北 武汉430010
  • 出版日期:2000-08-01 发布日期:2012-03-05

Cavitation study on surface spillway of Three Gorges Project

 GUO  Jun-Li, LU  Jun-Ying   

  • Online:2000-08-01 Published:2012-03-05

摘要: 根据三峡工程溢流坝表孔设计体型,通过减压试验 ,研究了体型的空化特性。成果表明:WES曲线坝面为免空蚀体型; 挑流鼻坎虽有弱空化现象,但空蚀的可能性不大;工作门槽体现为蒸汽型空化特征,其强度 随工作水头增大而加剧。对两道门槽进行局部体型修改后,两者的空化特性均有明显的改善 。要达到完全免除空化之目的,有待进一步优化。

关键词: 空化, 相似真空度, 背景真空度, 声压谱级, 气体空化, 蒸汽空化

Abstract: Based on design type of surface spillway of TGP,the caviation characteristics was studied by means of vacuum tank test,in which dete ction technques of underwater noise were adopted.The results indicate that the W ES profile spillway is cavitationfree type,weak cavitation occurs at the end o f the bucket lip but possibility of cavitation erosion is negligible,steam cavit ation appears in area of the working gate slot and becomes intensive with increa sing working head.Local configuration of double gate slots were modified by expe riments and the cavitation characteristics were improved clearly.In order to van ish the cavitation completely,further optimization must be made.