陡坡隧洞不同进口形式的水力特性分析

李蘅; 李学海; 杜泽金

doi:10.3969/j.issn.1001-5485.2014.01.0082014,31(01):38-41

PDF(1118 KB)

长江科学院院报 ›› 2014, Vol. 31 ›› Issue (1) : 38-41. DOI: 10.3969/j.issn.1001-5485.2014.01.0082014,31(01):38-41

水力学

陡坡隧洞不同进口形式的水力特性分析

李蘅¹，李学海²，杜泽金¹

作者信息 +

Hydraulic Characteristics of Different Inlet Types of Steep Slope Tunnel

LI Heng¹,LI Xue-hai²,DU Ze-jin¹

Author information +

文章历史 +

摘要

为研究陡坡隧洞的泄流能力和洞内水流流态等水力特性与隧洞进口形式的关系，以某水电工程支流导流陡坡长隧洞为例，运用水力计算分析和模型试验验证的方法，分析比较了锐缘进口和曲线进口形式对陡坡隧洞泄流能力和流态的影响。研究表明:采用曲线进口形式可以提高泄流能力，降低围堰高程，但设计工况下洞内流态处于明满交替流状态，不利隧洞结构安全；采用锐缘进口形式，泄流能力有所降低，但可避免洞内出现明满交替流状态。综合比较认为，在围堰规模较小时，设计陡坡隧洞采用锐缘进口更为合理。

Abstract

The effect of sharp-edge inlet and curved inlet on the discharge capacity and flow regime of steep tunnel is researched by using hydraulic calculation analysis and model test verification. The long steep diversion tunnel of a hydropower project is taken as the research object. Research shows that curved inlet could increase the discharge capacity and reduce the cofferdam height,but brings about free-surface-pressure flow in the tunnel,which is harmful to the safety of tunnel structure; whereas sharp-edge inlet reduces the discharge capacity,but avoids free-surface-pressure flow. Therefore,when the cofferdam scale of hydropower project is small,the sharp-edge inlet is recommended.

导出引用

李蘅，李学海，杜泽金. 陡坡隧洞不同进口形式的水力特性分析[J]. 长江科学院院报. 2014, 31(1): 38-41 https://doi.org/10.3969/j.issn.1001-5485.2014.01.0082014,31(01):38-41

LI Heng¹,LI Xue-hai²,DU Ze-jin¹. Hydraulic Characteristics of Different Inlet Types of Steep Slope Tunnel[J]. Journal of Changjiang River Scientific Research Institute. 2014, 31(1): 38-41 https://doi.org/10.3969/j.issn.1001-5485.2014.01.0082014,31(01):38-41

中图分类号： TV131.4

参考文献

[1] 李炜.水力计算手册(第二版)[M].北京:中国水利水电出版社,2006.(LI Wei. Handbook of Hydraulic Calculations (Second Edition)[M]. Beijing: China Water Power Press,2006. (in Chinese))
[2] 汪俊,桂林.有压输水管道中明满流产生与进口段布置的关系探讨[J].四川水利,2007,(4):32-34.(WANG Jun,GUI Lin. Study on Relation of the Free-surface-pressure Flow and Import Layout of Pressure Tunnel[J]. Sichuan Water Conservancy,2007,(4):32-34.(in Chinese))
[3] 漆力健.大底坡泄洪管道明满流的水力特性[D].成都:四川大学,2005.(QI Li-jian. Hydraulic Characteristic of the Free-surface-pressure Flow in the Outlet Pipeline with Steep Base Slope[D]. Chengdu: Sichuan University,2005.(in Chinese))
[4] 韩继斌,李学海,石教豪.某水电站混凝土重力坝方案支流施工导流1∶85水工整体模型试验研究报告[R].武汉:长江科学院,2011.(HAN Ji-bin,LI Xue-hai,SHI Jiao-hao. Report on the 1∶85 Hydraulic Model Test for the Diversion Tunnel of a Hydropower Project[R]. Wuhan: Yangtze River Scientific Research Institute,2011.(in Chinese))
[5] 张从联,钟伟强,江洧.泄洪洞有压流问题试验研究与初探[J].华南理工大学学报(自然科学版),2003,31 (增l):70-73.(ZHANG Cong-lian,ZHONG Wei-qiang,JIANG Wei. Experimental Research and Simple Discussion on the Pressure Flow of Discharge Tunnel[J]. Journal of South China University of Technology(Natural Science),2003,31(Sup.l):70-73.(in Chinese))