长江科学院院报 ›› 2019, Vol. 36 ›› Issue (2): 111-115.DOI: 10.11988/ckyyb.20170844

• 岩土工程 • 上一篇    下一篇

碎石层反射率模型及其运用研究

梁若婵1,张信贵1,谭康豪1,李芳华2   

  1. 1.广西大学 土木建筑工程学院,南宁 530004;
    2.广西大学 科技处,南宁 530004
  • 收稿日期:2017-07-26 修回日期:2017-10-29 出版日期:2019-02-01 发布日期:2019-03-11
  • 通讯作者: 张信贵(1966-),男,广西桂林人,教授,博士,主要从事道路工程、混凝土材料等方面的研究。E-mail:xgzhangchn@163.com
  • 作者简介:梁若婵(1993 -),女,湖北武汉人,助理工程师,硕士,主要从事岩土工程及混凝土材料方面的研究。E-mail:2844680978@qq.com
  • 基金资助:
    国家自然科学基金项目(51508114,41561015);广西自然科学基金项目(2015GXNSFBA139212)

Reflectivity of Crushed Rock Layer: Model and Its Application

LIANG Ruo-chan1, ZHANG Xin-gui1, TAN Kang-hao1, LI Fang-hua2   

  1. 1.College of Civil Engineering and Architecture, Guangxi University, Nanning 530004, China;
    2.Science & Technology Division, Guangxi University, Nanning 530004, China
  • Received:2017-07-26 Revised:2017-10-29 Online:2019-02-01 Published:2019-03-11

摘要: 阴阳坡效应对寒区道路工程建设质量和后期运营养护都有十分重要的影响,因此对边坡稳定技术的研究和创新成为当下的热点。在碎块石护坡表面喷涂浅色材料或高反射材料,将提高路基边坡的反辐射能力,从而可以大幅度减小地表接收的净辐射和增强块碎石层的冷却效果。通过建立碎石粗糙表面能量吸收模型,推导出碎石粗糙表面的宏观反射率R与微观反射率r之间的关系。借助于图像处理分析方法,准确分析碎石和孔洞区域的面积,据此估算碎石层的反射率,并利用实测数据验证模型的可靠性。对模型参数进行分析发现:降低块石表面粗糙度和近地面空隙度有利于提高整个碎石层的反射率;碎石表面的粗糙度抑制了宏观反射率R的提高;涂料的最佳选择要根据碎石层粗糙程度决定,建议选择涂料反射率在0.4~0.6为宜。

关键词: 碎石层, 阴阳坡效应, 多重反射, 反射率, 粗糙度, 图像处理, 多年冻土

Abstract: The sunny and shady slope effect exerts significant impact on the construction quality and operation and maintenance of road engineering in cold regions. Coating the embankment surface with materials of light color or high reflectivity will improve the anti-radiation ability of subgrade slope, intensify the cooling effect of crushed rock layer, and remarkably reduce the received net radiation. An energy absorption model for crushed rock rough surface is established to deduce the relationship between the macro-reflectivity R and the micro-reflectivity r on the surface of rough crushed rock. In association with image processing, the reflectivity of crushed rock layer is estimated by obtaining the area of crushed rock and cavities. Furthermore, the reliability of the established model is verified by measured data. Analysis on model parameters reveals that reducing the roughness of rock surface and the ground clearance degree are conducive to improving the reflectivity of the whole crushed rock layer. Roughness of crushed rock severely inhibits the improvement of macro-reflectivity R. In addition, the selection of coating material should be depended on the roughness, and we recommend the reflectivity of coating between 0.4-0.6.

Key words: crushed rock layer, sunny and shady slope effect, multiple reflectance, reflectivity, roughness, image processing, permafrost

中图分类号: