长江科学院院报 ›› 2017, Vol. 34 ›› Issue (11): 54-60.DOI: 10.11988/ckyyb.20160718

• 水力学 • 上一篇    下一篇

竖向进水管布置对ABR液相流态影响的PIV试验研究

曾涛,董亮,刘少北,张长练,王勇,何雨   

  1. 四川理工学院 过程装备与控制工程四川省高校重点实验室,四川 自贡 643000
  • 收稿日期:2016-07-14 出版日期:2017-11-01 发布日期:2017-11-19
  • 作者简介:曾 涛(1967-),女,四川自贡人,教授,博士,主要从事多相流技术及应用方面的研究,(电话)13890085255(电子信箱)396109721@qq.com。
  • 基金资助:
    四川省科技支撑计划项目(2014GZ0132);自贡市科技局重点项目(2013X12);四川理工学院创新基金项目(Y2016011)

Experimental Research on Effects of Layout of Vertical Inlet Pipe on Flow Pattern of Fluid Phase in Anaerobic Baffled Reactor by Particle Image Velocimetry

ZENG Tao,DONG Liang,LIU Shao-bei,ZHANG Chang-lian,WANG Yong,HE Yu   

  1. Key Laboratory of Process Equipment and Control Engineering in Sichuan Colleges, Sichuan University of Science and Engineering, Zigong 643000,China
  • Received:2016-07-14 Online:2017-11-01 Published:2017-11-19

摘要: 在折流式厌氧反应器(Anaerobic Baffled Reactor,ABR)不同进水管悬空高度和不同进水流量组合的工况下,利用激光粒子图像测速技术(particle image velocimetry,PIV)对ABR的第一格室液相流态进行了研究,测得反应器内降流区和升流区关键截面的流场数据,获得了液相速度和涡量强度与悬空高度的关系曲线;同时研究了相关流场特征,包括流线图谱和涡量场。结果表明:对于ABR的第一格室,合理的进水管悬空高度可以保证良好的进水流态,促使ABR涡量面积分布均匀,有效防止局部沟流和液相死区,确保ABR高效稳定运行。根据试验分析结果,提出了设计时可供参考的进水管悬空高度的取值范围:流量在0.018~0.270 m3/h时,悬空高度的取值范围为230~530 mm;流量在0.558~0.846 m3/h时,悬空高度的取值为530 mm。

关键词: 折流式厌氧反应器, 液相流态, 粒子图像测速技术, 竖向进水管布置, 悬空高度

Abstract: The flow pattern of liquid phase in the first cell of anaerobic baffled reactor(ABR) was studied in association with laser particle image velocimetry(PIV) under the combined conditions of different inlet flow rates and suspension heights of inlet pipe of the ABR.Flow field data at key section in downward flow area and upward flow area of the reactor were obtained, and the curves of velocity of liquid phase and vorticity intensity vs. suspension height were acquired. Meanwhile, characteristics of relevant flow fields were obtained, including streamline pattern and vorticity field. Results revealed that reasonable suspension height of water inlet pipe was important for the first cell of ABR, for it could ensure good flow pattern, uniform distribution of ABR vortex area, effective prevention of local channel flow and dead zone at liquid phase and stable operation of ABR. According to the experimental results, we suggest the range of suspension height of inlet pipe between 230-530 mm when flow rate is in the range of0.018-0.270 m3/h , and 530 mm when flow rate is in the range of0.558-0.846 m3/h.

Key words: anaerobic baffled reactor, flow pattern of fluid phase, particle image velocimetry, layout of vertical inlet pipe, suspension height

中图分类号: