长江科学院院报 ›› 2016, Vol. 33 ›› Issue (7): 55-59.DOI: 10.11988/ckyyb.20150438

• 水力学 • 上一篇    下一篇

U型堰进水口防涡墩试验研究

彭诚1, 王均星1, 谭哲武2   

  1. 1.武汉大学 水资源与水电工程科学国家重点试验室,武汉 430072;
    2.长江勘测规划设计研究院,武汉 430010
  • 收稿日期:2015-05-26 出版日期:2016-07-01 发布日期:2016-07-01
  • 作者简介:彭 诚(1992-),男,湖南永州人,硕士研究生,主要从事水工水力学方面的研究,(电话)13307145325(电子信箱)pc1118@whu.edu.cn。

Experimental Study on Anti-swirl Pier at the Intake of U-shaped Diversion Weir

PENG Cheng1, WANG Jun-xing1, TAN Zhe-wu2   

  1. 1.State Key Laboratory of Water Resources and Hydropower Engineering Science,Wuhan University, Wuhan 430072, China;
    2.Changjiang Institute of Survey, Planning, Design and Research, Wuhan 430010, China
  • Received:2015-05-26 Published:2016-07-01 Online:2016-07-01

摘要: 进水口漩涡是一种常见的水力学问题。以辽宁省清河分水口工程为研究背景,采用物理模型试验的方法,在大比尺为1/10的模型条件下对分流堰部位的进水口漩涡进行了重点试验研究。通过对原设计方案的相对临界淹没水深、速度与环量、进水口边界条件3个漩涡成因进行分析,从边界条件的角度出发提出了修改方案下边墙段的截弯取直、U型堰与防涡墩相结合的消涡方法。试验结果证明,修改方案不仅避免了进水口初始环量的产生,改善了整个分水口的水流流态,同时还优化了进口边界条件,显著地达到了消除进水口漩涡的目的。

关键词: 进水口漩涡, U型堰, 防涡墩, 消涡, 模型试验

Abstract: Intake vortex is a hydraulic problem which is common in actual project. In order to solve the problem, we take Qinghe water diversion project, located in Liaoning province, as research background. By using physical model test with big scale of 1∶10, we lay emphasis on intake vortex in diversion weir. There are three causes of vortex in original scheme: relative critical submerged water depth, velocity and circulation, and intake boundary condition. From the perspective of boundary condition, we analyze these causes and propose modified anti-swirl scheme, which contains side wall segment straightening and U-shaped diversion weir with anti-swirl pier. Experimental results prove that the modified scheme can be used to avoid initial circulation at intake and improve the flow pattern throughout diversion intake, in the same time, we can use it to optimize intake boundary conditions and significantly eliminate vortex at water inlet.

Key words: intake vortex, U-shaped weir, anti-swirl pier, vortex elimination, model test

中图分类号: